Why recycled plastic oil is difficult to use

Turning discarded plastics into a useful chemical feedstock is an appealing route for circular manufacturing, but the output is not a uniform substitute for petroleum. Waste plastic pyrolysis oil is produced by thermally decomposing plastics at high temperatures, and its composition can vary with the original plastics and their additives.

A Korean research team has now examined how impurities in that oil affect the catalytic processes used to convert it into light olefins. The work combines catalytic experiments with artificial-intelligence-based computational chemistry and was published in ACS Catalysis.

Impurities can change catalyst performance

Pyrolysis oil can serve as an alternative feedstock to petroleum or naphtha. When its hydrocarbons undergo catalytic cracking, the process produces light olefins, building-block chemicals used for plastics and other chemical products.

The challenge is that waste-derived oil can include nitrogen-, sulfur-, chlorine- and oxygen-containing impurities. Their types and concentrations depend on the feedstock. That variability makes it harder to maintain stable production and to anticipate how a catalyst will perform from one batch of oil to the next.

The researchers, led by Dr. Do Kyoung Kim of the Korea Research Institute of Chemical Technology in collaboration with Professor Tae Yong Kim of Korea University of Technology and Education, set out to identify the effects of those impurities and the mechanisms behind them.

From a single oil sample to a broader model

In 2024, the team reported a circulating fluidized-bed catalytic cracking technology that could convert waste plastic pyrolysis oil into light olefins without additional hydroprocessing. That earlier work used one type of pyrolysis oil, limiting what it could say about feedstocks with different impurity profiles.

AI and experiments reveal impurities hindering waste plastic pyrolysis oil recycling
Visual abstract. Credit: ACS Catalysis (2026). DOI: 10.1021/acscatal.5c08941

The follow-up study focuses directly on those differences. By pairing experiments with AI-based computational chemistry, the researchers developed a scientific basis for predicting declines in catalytic performance according to the kind and concentration of impurity present.

What the approach could enable

A prediction framework could be valuable wherever plastic-derived oils are treated as industrial feedstocks rather than as one-off experimental materials. Operators need to know not only whether a process can convert an oil, but whether a particular mixture is likely to degrade catalyst performance or change light-olefin output.

The research therefore shifts attention from pyrolysis oil as a single category to the chemical details inside each stream. The makeup of the discarded plastic and the additives it contains can influence the quality of the resulting oil, which in turn influences downstream catalytic processing.

A step toward more reliable chemical recycling

Plastic pyrolysis is often discussed as a way to recover value from difficult waste streams. Its practical performance, however, depends on controlling variable inputs. The new study does not eliminate that variability; it explains why impurity composition matters and offers a route to estimate its consequences before or during processing.

Further work will be needed to translate the findings into operational tools and to test them across a wider range of real-world waste-plastic feedstocks. Still, the combination of catalyst experiments and computational analysis provides a foundation for more predictable use of pyrolysis oil in petrochemical production.

For chemical recycling, consistency is central. The team’s work suggests that measuring and modeling impurities may be as important as the high-temperature conversion step that creates the oil in the first place.

This article is based on reporting by Phys.org. Read the original article.

Originally published on phys.org